limestone is porous and absorbent.You have to work to keep your Limestone clean.When removing stains, you need to take precautions to avoid damaging your limestone.
Step 1: The limestone should be vacuumed.
If you can turn off the spinning brush, your vacuum can be used to care for your limestone.You can still do a quick vacuum of the dust and dirt if you can't turn off the brush.There are cracks in the limestone and the vacuum removes dirt and dust from them.If you have a limestone table, use a handheld vacuum.Some vacuums have an attachment hose.For an elevated surface like a kitchen counter, this will work.
Step 2: You can use a dry mop.
mop the area after removing or dislodging some of the dirt from the floors.Don't wet your mop, use it dry to sweep the area.You can use a broom.There are several dust mops that work well for limestone.
Step 3: Wet the area with a damp rag.
It is important to remove dirt particles before using liquid.Add some mild soap to a bucket of warm water.Common hand soap and a smaller proportion of dish soap can be used.Submerging a rag into the mixture will remove as much water as you can.The area should be wiped down with a rag.Don't hesitate to go over the stain with the rag and take your time.You should soak the rag as many times as you need to.
Step 4: You can use a commercial poultice.
A mixture of ground chalk and hydrogen peroxide is called a poultice.Some versions use a different chemical.As a general guide, wet the poultice with distilled water after reading the instructions.The poultice should be applied to the stained area.Leave it in place for 48 hours.It will dry during this time.The limestone is absorbed into the drying process.It's time to rinse it off.The stain should not have been there.
Step 5: Baking soda is used to clean soap scum on limestone showers.
Baking soda can be used to gently remove soap scum.You should rinse with water.If necessary, non-acidic soap scum removers or a stone cleanser can also be used.It's a good idea to dry your shower to prevent soap scum build up.
Step 6: Clean spills.
If it's soot, dirt, or something else, Rub off the stains with a damp cloth or gentle soap.A bristle brush can be used to remove stains.The quicker the item is attended to, the better.Continue with deeper cleaning techniques if not.
Step 7: A regular cleaning is necessary.
You should dry mop your limestone floors every two weeks.If you have limestone countertops, you should clean them with a dust absorbent fabric every other week.There are lots of dry cleaning supplies.As long as the mop is clean, you can use it on a table.
Step 8: There are runners and doormats.
There are areas around the house that get a lot of foot traffic.There are spots near doorways and hallways.Mud and dirt can be tracked onto the floor.Before entering your house, you should have mats on your feet.
Step 9: There are coasters and pads.
coasters are used for the limestone table and countertop users.There are ring stains and watermarks on limestone.It's a good idea to have lots of coasters for you or your guests.Hot cooking supplies can be placed on mats.Similar to the condensation cups, the heat produced off hot plates can stain and damage your surfaces.