Kitchen sinks are prone to scratches.If you want to remove scratches, you can use a cleaning product or rough cleaning pads.When buffing out a scratch, move in the direction of the sink's grain.
Step 1: It's a good idea to use a scratch remover for deeper scratches.
Fine scratches can be rubbed out with a cleaning product.There are very deep scratches that need to be removed.Online or at local hardware stores, you can find scratch removal for sinks.If you still have the instructions, check them out.A scratch removal that works for your sink may be suggested by this.
Step 2: Do you know the direction of your sink's grain?
If you have the instructions from the manufacturer, you should know the direction of the sink's grain.You can see the lines of the sink run by looking at it closely.
Step 3: Remove the offending substance from the scratch.
grit pads should be used for stain removal.Refer to the product's instructions and spray on the right amount.The remover should be moved in the direction of your sink's grain.A light amount of pressure can be applied.You should apply enough pressure to get the scratch off the sink, but not so much that you end up damaging it.
Step 4: To remove the rest of the scratch, use a softer cloth.
The kit should have a lighter pad.The lighter pad should be used after most of the scratch is out.This can be used to buff out the rest of the scratch.As you buff out the remaining scratch, add water if the kit calls for it.Instructions on how to buff out the scratch and when to switch the pads should be provided in your kit.
Step 5: Don't use the remover.
After buffing out the scratch, use a microfiber cloth to remove the rest of the remover.To rinse out the rest of the scratch remover, wipe down the surface.Water is needed to completely remove the scratch remover.
Step 6: If you have very fine scratches, use a cleaning product.
A cleaning product can be used to remove scratches that are not very noticeable.It is possible to buff out fine scratches with dish soaps.You can use powder to clean the sink.
Step 7: Use a cloth or sponge to apply the cleaner to the sink.
You can use either a cloth or sponge to clean the sink.As you apply the cleaner, move in the direction of the grain.To completely cover the scratch, apply enough cleaner.
Step 8: Allow the product to dry.
Depending on the type of cleaner, the amount of time this takes varies.The product should be dry before it has a hazy texture.
Step 9: Get rid of the product.
To clean the product, use a rag or paper towel.The product lifted the scratch from the steel.Try a stronger product if the scratch was not removed.
Step 10: Use Scotch bright pads.
If you want to remove a scratch from a sink, you can use either low or bright pads.If you want to use this method to remove a scratch, you should pick up the pads at a hardware store.Sandpaper is the best option for deep scratches and bright pads are better for light scratches.
Step 11: Remove the scratch.
Rub the pad against the scratch, going in the direction of the sink's grain.As you buff out the stain, use even, long streaks.Continue until the scratch is gone.
Step 12: It is important to apply even pressure.
If you want to use this method, you need to apply pressure evenly across your sandpaper or pad.It is possible to wrap your sandpaper around a wood block to distribute the pressure evenly.