Silver jewelry can be used in many different ways in a collection.It can oxidize, tarnish and get dirty very quickly.It can be forgotten at the bottom of a jewelry box.If you're looking for a simple way to clean your silver jewelry, vinegar is a great solution.There are a number of cleaning solutions that can bring sparkle to your silver jewelry.
Step 1: The jewelry should be immersed in white vinegar.
You can put your jewelry in a jar or container.It should be covered with white vinegar so that it is completely immersed.Depending on how much tarnish you need to remove, you can let it sit for two or three hours.The jewelry needs to be washed and dried.The piece should be pretty clean after fifteen minutes if it is only moderately dirty.
Step 2: Baking soda can be used for a deeper clean.
Add a half cup of water to the container.Then, add some baking soda.Allow your jewelry to sit in the solution for two or three hours.Don't let the jewlery fall into the drain, rinse it under the sink, and dry it with a clean cloth.Leaving the sink strainer in place is a good idea if you are using the kitchen sink.
Step 3: Baking soda and tea tree oil can be used.
There is a glass mason jar in your kitchen.The jewelry should be placed in the bottom.The jewelry should be covered with half a cup of white vinegar and a drop of tea tree oil.You can leave the jewelry to soak in the mixture for eight hours while you are at work.You know the solution is working if you see debris floating around.If your kitchen sink has a high pressure washer, you should use it.Don't let go of your jewelry and leave the sink strainer in place.
Step 4: Baking soda is used to scrub the jewlery.
Baking soda is used to coat the jewlery.Use an old toothbrush to scrub the jewlery.After that, wash and dry your jewelry.Baking soda at the end will allow you to get into the cracks and other hard to reach places.
Step 5: Place aluminum foil in a shallow pan.
The pan should have aluminum foil on it.It's possible to use an oven safe kitchen pan to hold your jewelry.Once you have lined the pan, distribute your jewelry across the surface to make contact with the aluminum foil.
Step 6: The pan should have boiling water, baking soda and salt.
In a medium bowl, mix together a cup of boiling water, baking soda and salt.The jewelry should be put in the pan with the mixture.
Step 7: Put the pan with the vinegar in it.
The pan should have half a cup of vinegar in it.You should be able to see the bubble.
Step 8: Allow your jewelry to sit.
Leave your jewelry in the pan for a while.If you like, you can stir the jewelry every few minutes to make sure it touches the bottom of the pan.
Step 9: You should wash your jewelry.
You can rinse your jewelry with the pressure washer in your sink.Don't let it fall into the garbage container.Store your jewelry in a safe place after you dry it with a clean towel.
Step 10: You can use distilled water in your vinaigrette.
Pickling is a process that removes oxidation and residues from jewelry, such as after soldering or in order to clean a heavily tarnished piece.The minerals in tap water may react with the acid in the vinegar if you get some distilled water.
Step 11: The equipment needs to be gathered.
A particulate mask and safety gloves are required.Since it is not a good idea to use this pot for cooking afterwards, you will need a pot or crock pot.
Step 12: There is a non-toxic way to make a pickle.
A great pickle can be made with a variety of ingredients.Add a small amount of salt to every cup of water.It's a good idea to add the vinegar to the water.
Step 13: The pickle needs to be hot.
It's a good idea to warm up the pickle before boiling it.When you see signs of improvement, add the jewelry to the pickle.
Step 14: The jewelry should be washed and dried.
The jewelry can be removed from the pot with a pair of tongues.Then rinse it off.Use a clean cloth to dry it.