The recommended setting for household water heaters is not 150 degrees, but slightly less _ 140 degrees. ... Water temperatures higher than 140 degrees can burn the skin and are particularly dangerous for young children and the elderly.18 ene 1998
What temperature should hot water heater be set?
120 degrees Fahrenheit is the safety recommendation against scalding, but 140° is the common default setting. Most experts agree that anything below 120 degrees creates a risk for bacteria to develop inside your water heater from stagnant water, such as legionella that causes Legionnaire's disease.
Is 140 too hot for water heater?
Professionals recommend keeping your water heater set at a temperature between 130 and 140 degrees Fahrenheit. Any higher, or lower, could actually be dangerous for you and your family. While turning the temperature up higher can result in burns, turning it lower than the recommended setting can also be dangerous.30 dic 2015
What should my hot water tank thermostat be set at?
A domestic hot water cylinder thermostat should be set at 60-65ºC. This is high enough to kill off harmful bacteria such as Legionella. If you set the thermostat much higher than this the water that comes out of the taps will be too hot and there'll be a risk of scalding.
Is 50 degrees hot enough for hot water?
So, what is the best temperature range for your water heater? The EPA recommends 120 degrees because it's hot enough to keep diseases at bay, it's not hot enough to cause scalding, it will supply enough hot water for most small families and is relatively energy-efficient.19 abr 2018
What temperature should my hot water tank be set at Ireland?
Set your water heating to 65°C on your immersion heating so that you don't waste energy by overheating water. Fit a cylinder thermostat if the hot water is being heated by the central-heating boiler. This will moderate the temperature of the water.