If you frequently use your earbuds to listen to music, watch videos, or catch up on podcasts, you've probably noticed how dirty they get after a while.Ear wax, oil from your skin and other things can build up on earbuds, making you reluctant or unwilling to stick them in your ears.Most types of earbuds are easy to clean.With only a couple minutes and a few basic materials, you can get earbuds that are as good as new and ready for many more hours of use.
Step 1: Remove the earbuds from your device.
A toothbrush can be used to clean up messes.Remove your earbuds from your mp3 player before you start.It will prevent your device from coming into contact with water, soap or any other substances during the cleaning process that could potentially ruin it.The earbuds should be taken to an area where they can be cleaned safely.
Step 2: You can use a toothbrush to clean earbuds.
Buy a new toothbrush or dig up an old one.Make sure your earbuds are clean and dry before you use the toothbrush to clean them.The better the bristles are on the toothbrush.Toothbrushes with nylon bristles are the best.Since nylon breaks up static electricity, you won't have to worry about damaging the earbuds.One of the safest ways to clean and maintain ear openings is by using a toothbrush with long and narrow bristles.
Step 3: Rub the earbuds with a toothbrush.
The toothbrush can be used to go over the earbuds.As much dried-on earwax, dirt, pocket lint, and other debris as you can.The method works best for headphones that are only used occasionally and don't accumulate a lot of mess.The earbuds should be free of gunk once you're done.Don't brush the ear openings hard.If you push the earwax and debris further into the openings, it will be hard to clean.It is possible to prepare your earbuds for being cleaned with other products by scrubbing them with a toothbrush.
Step 4: Throw the toothbrush away if you want to wash it.
If you don't want to use the toothbrush again, throw it away.If you do, you can either boil it or put it through the dishwasher.It's best to either clean or dispose of the toothbrush after you've used it to clean things because your ears contain a lot of germs.There are earbuds.If you boil or wash a toothbrush, the heat will kill anybacteria on it and make it usable again.
Step 5: Take a mild soap solution and mix it.
If your ear buds have a lot of gunk on them, they'll need a deep cleaning.The sink or basin should be filled with water.Mild liquid detergent or hand soap can be added.You only need a small amount of soap.When it forms a solution, stir the soap and water together.The detergent in the soap solution should be enough to clean your earbuds.The risks to the electronic components of the earbuds are not the only reason to use too much soap.
Step 6: Wet a cloth with the soapy water.
Take a clean cloth and use it to get some soap solution out of it.Wring as much solution as you can until it is slightly damp.You don't want to ruin your earbuds by getting them too wet when cleaning electronic gadgets with water.Before you start cleaning, make sure your hands are mostly dry and clean.
Step 7: The earbuds have something on the outside.
The earbuds should be wiped down by using one corner of the washcloth.The buds rest in your ear canals on either side of the ear openings.Water can irreparably damage earbuds, so stay away from the ear openings themselves as much as possible.The input jack and cords should be covered with a towel.Water and debris can run into the earbuds if they are not held with the openings facing downward.The earbuds should be wiped lightly.Water could be forced out of the washcloth by using too much force.
Step 8: Don't let the earbuds get wet.
Press the earbuds into a dry towel to absorb any water left on the outside.Take the earbuds to a drafty, well-ventilated space and leave them there for at least an hour.The earbuds will be ready for use once they are completely dry.It's a good idea to let the earbuds dry overnight.Don't use a heat source such as a hair dryer to dry your electronics.Headphones made of plastic, thin metal wires and other materials can easily be melted or destroyed by direct application of heat.
Step 9: Rub alcohol onto a bottle.
You can get a bottle of rubbing alcohol at your local supermarket or pharmacy.You never know how foreign chemicals will react with the materials your earbuds are made from, so only buy alcohol that is pure and odorless.Rubbing alcohol is a cheap and effective way to clean and protect your belongings.You can buy a bottle of rubbing alcohol for a couple dollars or pounds and it will last you for many, many cleanings.It's ideal for sanitizing objects that have been inserted into the ears or other orifices because of its antibacterial properties.
Step 10: Take a cotton swab and put it in alcohol.
If you want the alcohol to absorb, place one end of a cotton swab into it.The cotton swab can be pressed against the side of the bottle to remove alcohol from the tip.A light coating of alcohol is all you need to clean a pair of earbuds.The cotton swab should be dry.Don't use too much alcohol, but keep the cotton swab wet.It's not a good idea to expose your electronics to the elements.If you happen to have an alcohol swab on hand, you might consider using it, even if you don't know what to do with it.You can control how much liquid goes on a cotton swab.
Step 11: It's a good idea to wash around the earbuds.
The earbuds' outer plastic area should be wiped with a cotton swab.It is possible to clear away traces of oil and perspiration with the help of the isopropyl alcohol.If there is no visible debris in the ear openings, avoid them.To make sure you're cleaning with a fresh surface, use one end of the cotton swab for each earbud.
Step 12: The earbuds have a towel on them.
The earbuds should be given a pat down with a dry towel.The alcohol should dry on its own.Your earbuds should be clean and free of gunk.It is easy to wipe your earbuds down with alcohol and it is safe.Happy listening!The method most professional technicians recommend is this one.