Wine corks, fishing rod grips, shoes and floors are just some of the things made from cork.It can be easy to keep it clean if you regularly remove dirt and dust, wash it with soap and water, scrub it to remove stains, and maintain it.
Step 1: There are vacuum cork floors.
It's a good idea to vacuum or sweep your cork floors.Remove any dirt or dust that is visible.Over time, that dirt can scratch the floor.Use a broom with a low setting on your vacuum.
Step 2: Prepare a cleaning solution.
A drop of mild dish soap should be combined with a cup and a quart of warm water.It's easiest to apply the solution to any surface if you put it in a spray bottle.You can mix it gently by rocking it back and forth.If you shake it, you'll create suds.Don't worry if you add more soap.Liquid soap and water can be used together.You can combine 5 drops of soap to every quart of water.
Step 3: Store-bought cleaners can be used.
Use a gently abrasive cleaning solution.There are cleansers that contain bleach.Your cork can be discolored by these.Don't use acidic cleansers that could damage your cork.Swiffers can leave streaks, so don't use them on your cork floors.
Step 4: There are cork floors.
To wash the floor with store-bought products, use a soft mop.When the floor is dry, you can see streaks or a soapy film if you rinse off the cleaning solution.Allow the floor to be dry with a soft rag.To avoid over-saturating the floor, ring out any extra water when you begin mopping.The cork could be damaged by this extra water.
Step 5: Twice a year, you should scrub your floors by hand.
Murphy Oil Soap can be applied to a microfiber cloth.Use your cloth to scrub the cork in the back corner of the room.Hand scrubbing your floor is optional, but it will help you maintain your floors and keep them clean.
Step 6: Don't use a steam mop to clean cork floors.
cork flooring can be damaged by a lot of water used by steam mops as they clean the floor.The cork may be damaged by the steam.It's best not to use this type of cleaner on your floors.
Step 7: The dirt should be wiped away with water.
The rag or cloth should be damp with warm water.To wipe down the cork, use a damp rag or cloth.While you wet the cork, try to loosen any dirt.
Step 8: Put your cork in the water.
You can wash your cork under the faucet.You are prepared to get fully wet if you do this for cork.Don't leave standing water on the floor.Don't put shoes under water with cork uppers.The shoes could be ruined by this.
Step 9: Use a cleaning solution to wash other kinds of cork.
Rub a soapy cleaning solution into your cork with a damp sponge.Rub the entire surface.Remove the cleaning solution from the cork.Allow the cork to air dry overnight before using or dry it with a clean, soft rag.Store-bought cleaners can be used to clean smaller cork items.
Step 10: Make a paste.
To remove dirt, make a paste with Borax.The water and Borax should be in a shallow bowl.Add just enough water and borax to make a thick paste.
Step 11: The cork needs to be scrubbed with a paste.
Rub the paste into the cork with a soft, damp brush.The paste should be used to scrub the entire surface of the cork.It's a good idea to rinse the paste off.To dry the cork, use a rag.The paste should be left on the cork after the scrubbing process.The paste should be dry on the cork.Use a rag to wipe off the paste.
Step 12: As soon as spills occur, wipe them up.
To prevent the spill from soaking into the floor, use a paper towel or cloth.Even though your floor has a seal, it's best to not have spills sitting on the surface.
Step 13: Place mats under your plants to protect the floor.
Water can spill out of your plant pots or pet bowls if your plants have drainage at the bottom.If it pools under the pot or bowl where you don't see it, it can damage your cork floors.It is possible to protect your flooring with a tray or floor mat.
Step 14: Disinfect using hydrogen peroxide.
If you want to destroy cork, apply a thin coating of hydrogen peroxide to it with a damp sponge.The sponge should be rubbed over the cork.Before using, allow it to dry completely.Do not mix the hydrogen peroxide.You don't need to rinse the cork.
Step 15: The cork needs to be sanded once or twice a year.
Any item made of cork can be sanded.Rub the cork with a piece of fine or extra fine sandpaper.Sand in one direction and not in circles.The top layer of cork will be removed if this is done.Limit the number of times you sand your cork.
Step 16: Protect with cork.
A commercial sealant can be used to protect cork shoes, floors, and fishing rod grips.Determine the best sealant for your cork floors by consulting with a flooring professional or manufacturer.For cork shoes, try using sealants.The sealant can be used to keep your cork clean.