Salt crystal lamps are made out of salt and add a beautiful glow to your home.It is believed that they provide many benefits, such as ridding the air of irritants and calming your mood.If not taken care of, they may sweat or melt.If you want to prevent this, keep the lamp in a dry area, use the proper bulb, and wipe down your lamp often.
Step 1: The lamp must be placed in a dry area.
Since the lamp is made of salt, it can start melting if it is placed near water.The lamp should be kept in dry places.It should not be placed near washing machines, showers, or bathtubs.
Step 2: The humidity in your home should be reduced.
The salt lamp may melt if the home is humid.If you want to help with this, you can use a dehumidifier in your home.It's important if you live in a humid climate.
Step 3: When using appliances that produce steam, put the lamp away
When using anything that creates steam, you may want to put the lamp away in a dry closet or room since humidity is the main thing that makes a salt crystal lamp melt.If you are boiling water on the stove, taking a shower, or washing laundry, you may want to move it somewhere else.
Step 4: The lamp needs to be dried frequently.
It's a habit to wipe down your lamp.lint can be left on the lamp by using a cloth, towel, or other item.If you don't want to do this every few days, wait until you notice the lamp is wet.
Step 5: The lamp must be cleaned with a damp cloth.
You can easily clean your lamp without melting it.To squeeze out as much water as possible, use a damp cloth or sponge.Dust and other debris should be wiped away.Pat dry.The lamp should be turned back on.The heat will kill anything that comes in contact with it.The lamp should not be submerged in water.Don't use cleaning products on the lamp.
Step 6: It's a good idea to keep the lamp on all the time.
Leave your lamp on all the time if you have problems with it melting.The heat can help slow the process of melting and dripping.If you don't want to keep it on, place a plastic bag or some other protection over it.
Step 7: The protective layer should be underneath the lamp.
If you can't stop the lamp from melting, put it on top of something to protect your furniture.This may be a coaster, saucer, plastic placemat, or something else that will stop the water from ruining your furniture.
Step 8: The correct bulb should be used.
Water is supposed to evaporate from the lamp's surface.It can give the illusion of melting if it doesn't evaporate properly.The lamp should be warm to touch, but not hot.A 15- watt bulb is strong enough for lamps less than 10 pounds.For a 10 to 20 pound lamp, use a 25 watt bulb, and for a lamp 20 to 60 watt bulbs.
Step 9: Look at the bulb.
Check the bulb for signs of melting salt crystal lamp.The lamp may leak into the bulb if it is melting inside.If the bulb flickers, you should notice.
Step 10: You need to replace the bulb.
You should replace the bulb if you are having trouble with the lamp.It's possible you don't have the correct bulb.It's a good idea to make sure the bulb you're using is heat- producing.You should be able to buy replacement bulbs like the ones that came in your lamp at any home improvement store.The lamp may be faulty due to damage from the water.