There are iron-on patches that are attached to fabric.These patches are easy to apply, but can be difficult to remove.There is glue left behind by removed patches.There are some tricks you can use to remove iron-on patches.
Step 1: If it can take the heat, check it out.
Unless you add the patch yourself, you need to make sure it won't be damaged by ironing it.Some patches are applied with heat.Pick a small part of the item that is hidden.There is a thin dish towel on top of the area.Press down on the small area you're testing.For about 15 seconds, hold it.Check your item for damage by removing the iron.The iron should be on the proper setting if you are treating a delicate item.If you don't have any experience ironing this type of fabric, the adhesive removal method is probably a better idea.
Step 2: Put the patch over it.
To expose the cloth part of the patch, position your item.Place either wax paper or a thin towel over the patch.Make sure the covering is completely clean and free of anything that could melt into the fabric of your item.
Step 3: The patch should be ironed.
Before using your iron, preheat it to its highest setting.Put your iron on the paper/cloth where the patch would be.For about 15 seconds, hold it there.The iron and the covering need to be removed from your item.If the glue doesn't seem to have softened, apply the iron again.Continue adding heat until the glue is melted.
Step 4: Put the patch back on.
The iron's heat should melt the glue and make it stick.Remove the patch from your item by lifting it up.Hold onto the item with one hand and peel it with the other.You can use your fingers, but be careful as the glue will be hot.If you have trouble lifting up the first part of the patch, try using a butter knife.Tweezers are able to slide between the patch and your item.You can slip a butter knife between the patch and your item if you don't have tweezers.Lift up and use your fingers to remove the rest of the patch.You may have to make a few passes with the iron if the patch is large.Remove large patches section by section.
Step 5: Purchase a fabric-safe removal product.
Xylene or orange oil-based glue removal products work well.Pick a liquid-based product that can absorb fabric.It will be easier to use a spray bottle for this purpose.Goof Off is one of the common brands.Substitute alcohol for an effective alternative.
Step 6: Do a patch test of your clothing.
It is possible that the glue may stain your item even if it is advertised as fabric safe.Before you use the remover on a patch, you need to test it out.It's a good idea to do this over a clean sink.You can find a small hidden area on your item.The inside back edge of a hat or jacket is a good choice.There is a small amount of glue on this spot.Use your fingers or a rag to remove the glue from the fabric.Check for discoloration after rinsing off the glue.
Step 7: You can expose the area underneath the patch.
If your item is a hat, turn it inside out.You need to get to the fabric that is on the patch.If you have a canvas bag, lay it out upside-down.
Step 8: You can apply your remover.
Pour the glue removal solution liberally on the back of the cloth.Enough soaks through your item.You need to cover the whole area behind the patch.Use your fingers or a clean rag to work the removal into the fabric.Wait about a minute for the patch to loosen.
Step 9: Take off the patch.
The glue should be made sticky by the remover.You should be able to easily remove the patch from your item.The item should be turned right-side out.Hold it with one hand.The edge of the patch is between your thumb and index finger.Pull back to remove the patch from your item.Work your way around the patch until it's gone.
Step 10: If there are any areas that are stubborn, repeat.
Try to repeat the process if the patch is still stuck to your item.It takes a long time to completely remove the patch.You will need to try a different glue removal if it hasn't softened the glue at all.If you don't plan on keeping the patch, you can trim it off with scissors.It will be easier to work with and the patch won't stick back onto your item.
Step 11: Check the stains.
There is a chance that the glue from your patch will leave a mark.If your patch is discolored or sticky, you need to take further action to make it look new again.If you used the method, you should wash your item first.The glue may be removed on its own.
Step 12: It's a good idea to apply the remover directly.
Pour more glue onto the patch.You can massage it with your fingers or a rag.Allow it to work for a short time.You can make your own at home.Add two parts baking soda with one part coconut oil and a few drops of orange essential oil.It works well at removing remnants, but not for removing the patch.It is hard to soak through fabrics with a thick paste.
Step 13: Remove your item as usual.
You can wash your item using any method you want.If the solvent will damage your item over time, remove it as soon as possible.If the item is machine wash safe, throw it into your washing machine with a normal load of laundry.Hand soak delicate items using cold or room temperature water with a small amount of detergent.After the glue has been removed, try scrubbing it with a soft toothbrush.Liquid laundry detergent can be applied to the patch.Try to repeat the process with more glue if there is still some left.It might take a few tries to completely remove the stain.Don't put the item in the dryer until the stain is gone.It may make it harder to clean the stain.
Step 14: It is recommended to use white vinegar for tough stains.
Water is often used to rinse glue away.If you want to soak the spot, first wash it with white vinegar and then soak it.It works well for delicate items with caked-on glue.Try soaking your item overnight if spot treatment doesn't work.You can use undiluted vinegar for white items.One cup of vinegar per gallon of water is enough to keep colored fabric from bleeding.It is always a good idea to do a patch test before using white vinegar on clothing.Only white vinegar can be used.Other types can stain clothing.