The pros and cons of painting the ceiling with flat or semi-gloss paint.

To get free estimates from local contractors, please indicate yours.

Who doesn't like a fresh coat of paint on the walls?Home improvement jobs deliver satisfying returns for both time and money.Paint is a great way to make a room look great, whether you are refreshing an existing color or changing the entire look of your room with a new hue.Even a relatively simple task requires making decisions.Do you prefer flat paint?Both have advantages and disadvantages.

You need to consider the condition of your walls when making a decision.If you are working on a new wall that is professionally finished with a smooth surface, it is a good idea to use satin paint.Flat paint is a better choice if there are any imperfections in the surface, such as bumps, cracks, or holes that have been filled but are still visible.While the light will bounce off the more reflective surface of the paint, it will not show every flaw.

Regardless of the paint you use, your walls need to be prepared for painting the same way.The walls have to be washed after everything is removed from them.To create a smooth surface, any loose paint needs to be removed and holes patched.Primer 1 is the best primer for a long- lasting paint job.

It is easier to apply flat paint.You don't have to worry about maintaining a leading edge of wet paint because it has no sheen.The most efficient way to cover a wall with flat paint is to quickly go over the walls with a roller in a zig-zag or W pattern, going back to fill in the gaps and touching up the edges.For one or two more coats, this can be repeated.

If you apply wet paint over a dry edge, you will end up with a mark on the wall.Many spots where the sheen is not even would be left by using the W technique.The best way to apply paint is to load the roller with paint and apply it from top to bottom, one roller wide, and then apply the next strip of paint.That way there is always a wet edge.

Let's look at a basic paint job to see which costs more.The example we will use is a 10x12-foot bedroom that takes 2 gallons of paint.

The cost of a gallon of flat paint can be as low as $10-$45 per gallon.If you are hiring a painter, it will take about 7 hours of labor.Tools and other supplies cost about $20Primer 1 costs between $10 and $35.For completing this project with flat paint, you can get a range of $190-$390.

Wall preparation can take longer than painting to achieve a smooth surface, so the project may take more time.The labor costs will be higher.You can expect to pay anywhere from $20 to $50 per gallon.Primer 1 will cost from $30 to $55.This project can be done with paint for less than $500.

Different spaces in the home are better suited to these paint finishes.Ceilings are often painted in flat white paint because they are likely to have imperfections and are meant to be discreet, which is accomplished with the matt, non-reflective surface of flat paint.In a spare bedroom or home office, where there will be less chance of the walls needing regular scrubbing, flat paint will work well.

On the other hand, high-traffic areas like kitchens or children's rooms need a more durable surface.It's a natural choice for a bathroom if you want a smooth paint.

If flat paints need to be cleaned frequently, smilanese paints are better.Some of the paint may be removed by scrubbing it rather than just the dirt.The sheen of the paint can be attractive, but it can also be a harder surface to clean.When choosing paint for your home, this should be taken into account.Flat paint will not be exposed to the wear and tear of a high-traffic area.

If you use satin instead of flat paint, you won't have to repaint as often.The matt surface of flat paint absorbs dirt from the environment, while the same dirt can be easily wiped or scrubbed off of a satin finish.You can get more years out of your paint job with a satin finish.