quarry tile may need to be cleaned if you have an older home, restaurant, or gas station.It can be difficult to clean quarry tile because it's not glazed, but it can develop a beautiful finish over time.You need to mop up spills quickly because they don't stain.A simple mopping with warm water and a strong mop is all that is needed for this floor to be clean.If you need to do deeper cleaning on the floor, use a pH neutral cleaner.
Step 1: It's a good idea to wipe up spills quickly.
If you're not careful, quarry tile can be stained.It's important to wipe up spills as quickly as possible so they don't stain the floor.Once the area is clean, you can use warm water for cleaning, but wipe it up.
Step 2: Grease stains can be treated with paint thinner.
Paint thinner can be used if you get a grease stain that won't come up after mopping.Open the doors and windows in the room.Let the paint thinner sit on the stain by dipping a cloth in it.Leave it for an hour or so and cover it with a piece of plastic.Lift it off and wipe it down with a new cloth.After that, clean as usual.
Step 3: Pick a mop that won't be broken down.
Older string mops won't stand up against this type of tile.For heavy duty use, choose a looped-ends knit mop, or a tube mop head.The best mop is a synthetic one.
Step 4: It's a good idea to sweep the floor.
If you want to clean up before mopping, use a standard broom and dustbin.If you prefer, you can vacuum the area.You want to start with a clean floor.
Step 5: Warm water and a mop can be used to clean the floor.
This type of tile does not need a strong cleaner.If you want to clean everyday, try running a mop over the floor with a bit of warm water.As necessary, focus on dirty areas.
Step 6: To dry the floor, use a dry mop or rag.
Don't forget to dry the floor off after you've run water on it.Water can mold more easily than other types of tile, so it's not good for it to sit in this floor.
Step 7: Pick a cleaner that isn't acidic.
You don't want a basic cleaner for this type of tile, so pick a cleaner that says it is neutral.Special cleaners can be found for quarry floors.You can make your own cleaner.When the baking soda is completely dissolved, mix it into a gallon of water.Stir gently and add 5 drops of liquid dishwashing detergent.
Step 8: The mop should be damped with the mixture.
You don't want to use a lot of water or cleaner on this floor.Make sure you wring out the mop well after you use the cleaner.
Step 9: The floor needs to be cleaned.
The mop should be run over the floor.You don't want to use anything abrasive on the dirty areas.The tile will always have a matt finish.You may need to scrub it a bit harder, but it will still get darker over time.
Step 10: The floor must be thoroughly cleaned.
It can damage the tile if you leave a cleaner on the floor.Make sure you get off all the cleaner before moving on by rinsing it off with warm water.
Step 11: To dry the floor, use a dry mop or rag.
You can dry the floor with a dry mop.If you prefer, you can use a rag.You don't want to leave water on the floor.