There are four reasons why your chainsaw chain is smoking.
The chain on your chainsaw is heavy.It is subject to a lot of threats because of the wear and tear.
One of the most common problems with chains is that they start smoking.Why does this happen?
When you notice that your chain is smoking, the first thing you should do is turn off the chainsaw.
If the chain is already smoking, there are some signs of trouble that you have previously ignored.
You need to understand the reasons that cause the chain to smoke, how to avoid them, and what to do when the smoke starts to appear.
Smoking becomes a serious problem if you don't do anything about it.It is easy to identify why there is smoke while you are using your chainsaw chain.
If you have no previous experience, it can be hard to determine why your chain is smoking.
The reason is probably one of the following, and dealing with it will keep your chain in perfect condition.
As the debris and sawdust accumulate on the filter of the chainsaw, how much air is allowed to pass through to the engine is restricted.It makes the chainsaw work harder than it should.
Use a brush to remove debris from the air filter.To make sure the air filter works the way it should, apply air pressure to clean all the remnants.You can easily replace the air filter if you feel it's old or dirty.
Ensuring that the chainsaw chain will work the way it should is dependent on constant lubrication of the chain and bar area.If the oil is dry, there won't be enough lubrication and the chain can get overheated.
Don't try to use the chainsaw when the chain is smoking.Put lubrication oil in the guide bar area.
There could be a problem with the mechanism of oil transmission, where there is enough oil but not enough to reach the bar area.If the oil gets trapped and doesn't provide enough lubrication, this can happen.
If the oil is reaching the bar area, you need to use the chainsaw and make sure there is enough oil in the reservoir.The transmission mechanism needs to be fixed by a professional.
You might not be able to fix this problem on your own because a professional will have the necessary tools and knowledge to do so.
Turn on the chainsaw and watch as the oil is filled.You should be able to see the oil in the chain.The amount of oil can be checked after a while.
The lubrication mechanism might not work the way it is if there is debris, grease, or dust.You should use a cleaner to make sure the system works the way it should.
It is a matter of trial and error to adjust the chainsaw chain tension.You need to make sure that the chain isn't too tight or loose after you install the chainsaw chain.
The chainsaw chain can get dull fast if it is too tight.Smoking of the chain can be caused by this.