It's a natural cleanser for tile.A mixture of equal parts water and vinegar can be used to clean tile floors.It is easy to clean tile grout.You can use a mixture of baking soda and vinegar to get rid of tough stains.
Step 1: It's a good idea to sweep or vacuum the floor.
If you want to clean a tile floor, you need to remove all the debris from the floor.Dirt and debris can be removed from the tile floor with a broom, dust mop, or vacuum cleaner.It's good for ceramic tile floors.Don't use it on marble or granite.Use a cleanser that is specifically formulated for delicate stone types.
Step 2: The hot water and vinegar should be in a bucket.
Add hot water to a bucket.The bucket needs to be large enough to rinse and wring out a mop.
Step 3: Wring out a mop.
Put the mop in the bucket.Take the mop out of the bucket.Try to get as much water out of the mop as possible.
Step 4: Take care of the floor.
To mop the floor, use side-to-side motions.While mopping, wring out the mop frequently.When you're done mopping half the area, make a fresh bunch of hot water and vinegar.
Step 5: The bucket should be filled with clean water.
You will need to rinse the floor with clean water after mopping it.The solution should be dumped down the drain.The bucket should be filled with hot water.
Step 6: Clean the floor with water.
Use side-to-side motions to mop the floor after dipping the mop in the fresh water.As you mop, rinse and wring it.After mopping half of the surface area, fill the bucket with fresh water.
Step 7: The floor should be dry.
The floor should be dry before you walk on it.There are footprints and debris on the floor.If you want, you can dry the floor with a soft towel.
Step 8: You can make a paste from baking soda and vinegar.
If there are stains on the floor, try mixing a small amount of vinegar into some baking soda to make a paste.The paste should be applied with a scrub brush or sponge.To remove the paste, use a wet paper towel.
Step 9: Put the two things into a spray bottle.
You can make as little or as much solution as you want.Put the water and water in a spray bottle.
Step 10: Lemon or essential oils could be added.
Adding lemon or essential oils to your cleaning solution can make it smell better.Add 12 a lemon or 15 drops of an essential oil.
Step 11: To combine, shake.
Attach the nozzle to the bottle when you add all the ingredients.To combine the ingredients, shake the bottle.
Step 12: The solution should be sprayed on the tile.
The tile should be sprayed with the cleaning solution.You should saturate the tile surface with the solution.
Step 13: Allow the solution to sit.
Allow the solution to penetrate the tile when you spray it with it's cleaning solution.Let the solution sit on the tile for a short period of time.
Step 14: It's a good idea to rinse with water.
After you allow the cleaning solution to sit on the tile surface, rinse it with clean water.You can either pour water on the tile surface or wipe it down with a cloth.
Step 15: You can use a baking soda paste to work out stains.
If there are still stains on the surface, you can make a paste using baking soda and vinegar.To make the paste, mix 3 parts baking soda with 1 part vinegar.Then apply the paste to the stain using a sponge.The leftover paste can be removed with a wet paper towel.
Step 16: The tile edges should be covered with vinegar.
When applied at full strength or with water, it can clean grout.The tile should be carefully poured along the edges to allow it to soak into the grout.
Step 17: It is a good idea to let the vinegar sit for 10 minutes.
Allow the vinegar to soak into the grout after you pour it along the tiled edges.It is a good idea to let the vinegar sit for 10 minutes.
Step 18: The toothbrush should be used to scrub the grout.
You can scrub the grout using small, circular motions after you allow the vinegar to soak in for 10 minutes.An old toothbrush is the best one to use.
Step 19: It is a good idea to rinse with clean water.
You will want to rinse the tile and grout after you finish scrubbing it.You can either pour clean water over the tile or wipe it clean with a wet cloth.
Step 20: Baking soda and vinegar can be used for a deeper clean.
Baking soda can be added with a small amount of vinegar.The two ingredients should be combined to form a paste.The toothbrush can be used to scrub the grout.Make sure you rinse the mixture with clean water.