The shine is added to the surface of the floor by the product.The liquid distributes a film over the surface when it is used.It can cause the floor to lose its luster over time.It is not recommended for some floors because of the build-up.It's a good idea to wipe up the product from time to time, using cleaning products designed for your hardwood, linoleum or laminate flooring.
Step 1: Dust and debris can be removed through a vacuum.
Move as much furniture as you can.You need to have access to the areas that were covered.
Step 2: You can open the windows.
A strong smell can be caused by mixing a vinegar solution.
Step 3: Put 1/2 cup of white vinegar in a gallon of water.
You can submerge your hands in the water if it's cool.The waxy substance from the Mop and Glo is brought up by the acidic nature of the vinegar.
Step 4: Lemon, orange, and clove essential oils should be added.
The oils subdue the smell.
Step 5: It's a good idea to fill another bucket with warm water for rinsing.
Step 6: Place the microfiber cloth in the bucket.
Keep the amount of solution and water to a minimum to keep the wood from getting wet.Start scrubbing from the farthest corner.
Step 7: After the solution sits for a few minutes, you can rinse sections of the floor with clean microfiber cloths.
It takes a few minutes for the vinegar to break.It's a good idea to rinse well.
Step 8: Dust and debris can be removed by vacuuming the floor.
You don't want anything to stick to the surface.
Step 9: Purchase gloves that will be used in the process.
Put damp rags and sponges in a bucket.
Step 10: To clean the film, buy acetone.
It is possible to get this at a specialty cleaning store.
Step 11: As you prepare the space for Mop andGlo removal, open all of the windows.
You have to use harsh chemicals to remove film since you shouldn't use large amounts of water.
Step 12: Put the acetone in the spray bottle.
Clean with scrap rags.
Step 13: Don't use brushes that are too harsh on the floor.
You can use a non-stick scrubber sponge or steel wool to bring up tough film.
Step 14: The film needs to be renewed in order for your floor to look new.
It takes a lot of work to get the Mop andGlo up.Water and a microfiber cloth can be used to clean your flooring after you have removed it.