NPT is defined by ANSI/ASME standard B1. 20.1. The taper rate for all NPT threads is 1 inch of diameter in 16 inches of length ( 3⁄4 inch per foot or 62.5 millimeters per meter) measured by the change of diameter (of the pipe thread) over distance of thread.
How do you determine NPT fitting size?
To determine the NPT size, with a caliper, measure the diameter of the 2nd or 3rd thread on your pipe, fitting or valve as shown below. Find the caliper measurement in the chart and cross reference the nominal NPT pipe size. Don't get confused, the actual measurement is not the same as the NPT pipe size.
Pitch (the distance between threads) is expressed as the number of threads per 25.4 mm (1 inch). As with NPT threads, the nominal size does not represent true outside pipe diameter but in the larger sizes it comes very close. Sizes start at 1/16˝ and go up through 6 inches.
What does 2 inch NPT mean?
National Pipe Threads (NPT) have tapered threads. These are the most common threads used for general purposes. NPT threads are designed with a 60 degree thread angle, and are used for joining and sealing pipe to fittings in low pressure air or liquids and also mechanical applications.
What is the diameter of 1/2 inch NPT?
What is NPT thread type?
NPT is the abbreviation for National Pipe Thread Tapered, which is the U.S. standard for tapered threads used to join pipes and fittings. They were established as a standard by the American National Standard Pipe Thread, commonly referred to as the national pipe thread standards.31 Oct 2018
What are NPT thread sizes?
Commonly used sizes are 1⁄8, 1⁄4, 3⁄8, 1⁄2, 3⁄4, 1, 11⁄4, 11⁄2, 2, 21⁄2, 3, 4, 5, and 6 inch, as pipe and fittings by most U.S. suppliers. Sizes smaller than 1⁄8 inch are occasionally used for compressed air, while sizes larger than 6 inches are often joined by other methods.