What is the difference between a tenon saw and a back saw?
What are Tenon Saws? A tenon saw is a special type of back saw. Any saw with a reinforced spine can be called a back saw, but a tenon saw has specific uses and characteristics for achieving controlled, precision cuts in wood.
What is a Mitre back saw?
A manual miter saw is a specialty handsaw, also known as a backsaw, that has a reinforced spine along the back to keep the blade rigid during cutting. It is always used with its companion tool: a miter box.
What back saw to buy?
- BEST OVERALL: Stanley Fatmax Tenon/Back Saw.
- BEST BANG FOR THE BUCK: GreatNeck BSB14 12 Inch Mitre Box w/ 14 Inch Back Saw.
- BEST DOVETAIL SAW: Zona 35-380 Thick Dovetail Saw.
- BEST GENT'S SAW: Crown 187 8-Inch 203-mm Gents Saw.
- BEST TENON SAW: Spear & Jackson 9550B Traditional Brass Back Tenon.
Is a dovetail saw a back saw?
Dovetail saw a small backsaw used to cut dovetails. These saws will usually have a higher number of teeth per inch (around 15 - 20 T.P.I.) with teeth sharpened in a rip tooth pattern and minimal set to leave a narrow kerf.
Do you really need a dovetail saw?
So you need a dovetail saw. A well-sharpened well-set dovetail saw is used as much for other cutting alongside its larger cousin the tenon saw, which also is not a dedicated use saw either. Most tenon saws are sharpened for aggressive rip cut, which is exactly what you need for cutting the cheeks of tenons.Jan 8, 2012
What is special about a dovetail saw?
A dovetail saw is the most commonly purchased backsaw, since it is used so much in cutting dovetail joints. It has a rip tooth configuration (again, discussed in my hand saw buyer's guide), which enables it to cut with the grain, but also works acceptably well at cutting across the grain on small cuts.
What saw to cut dovetails?
Two saws that do the trick are a Japanese dozuki (top) and a Western backsaw. Don't use a crosscut Japanese dozuki saw, which will slow you down and mess up your joints, too. A coping saw (left) is great for removing wood waste , which you might want to do before chiseling to the baseline.Feb 4, 2021
What is the difference between back saw and dovetail saw?
“Back saws” are specifically designed for fine joinery work (they have a rigid steel or brass back to keep the blade stiff). Dovetail back saws are the smallest back saws (typically 8-10″) and are configured with fine rip-filed teeth (11-20 ppi) for cutting along the grain (think dovetails).
What is the purpose of backing a saw?
A backsaw is any hand saw which has a stiffening rib on the edge opposite the cutting edge, enabling better control and more precise cutting than with other types of saws. Backsaws are normally used in woodworking for precise work, such as cutting dovetails, mitres, or tenons in cabinetry and joinery.
How do you use a miter back saw?
https://www.youtube.com/watch?v=mcXHr377Yn4
What can a mitre saw be used for?
Power miter saws are designed to make angled cuts for moulding, trim work, rafters and other general carpentry applications. The saws also make straight crosscuts and, when equipped with the right blade, the versatility of a miter saw is an important part of a tool arsenal for professional carpenters as well as DIYers.