Introducing the Aspire Plato. An all in one personal vaporizer and tank system that fits in the palm of your hand. The Plato brings you temperature control and normal wattage mode up to 50 watts along with adjustable airflow, but that isn't all.
What coils fit Aspire Plato?
The Plato by Aspire can take two types of coils. This is the direct to lung (DTL) sub ohm coil. To increase flavor Aspire integrated Kanthal Clapton wire for the heating element. Clapton wire consists of a thicker inner wire wrapped with a thinner outer wire.
How do you change the coil on an Aspire Plato?
https://www.youtube.com/watch?v=4xmijK3q4W4
How do you adjust an Aspire vape?
Step 1: Quickly press the fire button 3 times to enter the wattage setting; the wattage value will flash to indicate that the power is being set. Step 2: When the wattage value is flashing, press the fire button to adjust the wattage value, the value increases 1W per click (you can only increase its wattage).Jan 19, 2021
How do I change the coil in my Aspire Nautilus?
https://www.youtube.com/watch?v=hRe-gXwdpe4
When should I change my Aspire coil?
Your Coil Is Used Up If you are a regular vaper but not particularly heavy, it could last a week or two. Irregular or casual vapers might find they need only change their coil every four weeks. Whatever your vaping habits, though, you should consider e-cig Coil Replacement at least once a month.May 31, 2017
How do I change the settings on my Aspire vape?
Pressing fire button under different modes will confirm your settings. While the mod is on, swipe down the screen twice will take the mod into its menu interface, where you can adjust the settings to your liking. 1.
How do I change the voltage on my Aspire vape?
When the mod is unlocked, pressing the fire button and plus button simultaneously for 2 seconds will allow you to switch modes between Wattage, Voltage and Bypass. When the mod is in wattage or voltage mode, pressing the plus or minus button will change wattage/voltage values.
How do I change the wattage on my Aspire AVP?
Press the mode button twice in rapid succession to set the output wattage, the light will flash in different colors 3 times to indicate the output wattage: flashing white is 16W, flashing green is 14W, flashing blue is 12W, flashing red is 10W.Nov 14, 2019