BONDERITE® metal pre-treatments are designed to clean, coat and protect multi-metal surfaces. The Bonderite® products provide excellent corrosion protection, deeply adhered surface preparation and durability for extended equipment life.
How do you use Bonderite m-CR 1132?
Activate by holding the applicator tip down on the surface to be treated. Press the pen tip down for 15 to 30 seconds to open the spring valve allowing BONDERITE M-CR 1132 AERO to wet the applicator tip. When the BONDERITE M-CR 1132 AERO just wets the tip, release the downward pressure. The unit is ready to use.
How do you use Alodine 1132?
Apply the Alodine® 1132™ solution to the metal surface with firm, smooth, even strokes, covering all edges. Over- lap each stroke and allow to dry. Within 5 minutes of the first coat, apply a second coat at a 90° angle to the first coat with the same smooth, firm stroke.
What is alodine coating?
Also known as chem film or chemfilm, Alodine® is a chromate conversion coating that protects aluminum and other metals from corrosion. ... Chromate conversion coatings are a type of chemical conversion coating. In chemical conversion coatings, the metal undergoes a chemical reaction at the surface.
How do you apply Bonderite to alodine?
Apply BONDERITE M-CR 1201 AERO (known as ALODINE 1201): For immersion application, BONDERITE M-CR 1201 AERO (known as ALODINE 1201) is diluted by mixing 33 parts of BONDERITE M-CR 1201 AERO (known as ALODINE 1201) and 67 parts of water for each 100 parts of bath volume required.
How long does alodine take to dry?
“What is the dry time, how soon can we apply paint (primer/topcoat) to the Alodine?” Dry time is usually 5 minutes or less, and paint coatings can be applied after this time. “Can we use the Touch-N-Prep pens for electrical bond applications?”