A boom allows you to utilise your forklift truck for handling rolls or coiled products. We have 2 types of booms: carpet booms and booms for coils. Carpet booms are designed for handling carpet and other types of floor covering. ... In addition to the forklift boom attachment, we also sell this attachment for telehandlers.
What are the parts of a forklift called?
- Cab: The cab is the central part of the forklift. ...
- Carriage: The carriage mounts the forks to the mast and serves as a support structure for the forklift.
- Mast: ...
- Load Backrest: ...
- Forks: ...
- Overhead Guard: ...
- Tires: ...
- Counterweight:
How does forklift mast work?
As you may already know, a forklift uses hydraulic pressure to raise the mast up by raising the lift cylinders. This, in turn, raises the inner mast channels, but without the lift chains, your forks and carriage aren't going anywhere. ... The chain is then bolted into a boss that is welded onto the inner mast rail.
How does forklift steering work?
In a car or truck, the front wheels steer the vehicle. However, a forklift has the steering wheels in the rear end of the forklift so it can swing in a circle around the front wheels that support most of the load. This allows the forklift to rotate the load into the correct position.
How much can a 6000 lb forklift lift?
For example, a forklift rated to carry 6,000 lbs at a 24″ would have a maximum load moment of 144,000 pounds. This equation is useful for determining if an unusual load (e.g., one longer than 48″ or with uneven weight distribution) can handle safely.Aug 19, 2018
How much can a forklift pick up?
What is Forklift Capacity and how is it measured? Forklift capacity is the measurement of how much weight a particular forklift can lift. Lower capacities begin around 3,000 lbs. and can go up to over 50,000 lbs.
What is a 5K forklift?
Affordable and lightweight with a lifting capacity of 5,000 pounds, The 5K Series Donkey forklift has power and durability for the heaviest loads. The 5K Series has standard features that include side shift, strobe light, smart backup alarm, and corrosion resistant features.
How much can a 10k forklift lift?
This dual fuel forklift has a maximum lift capacity of 10,000 lbs. and a maximum lift height of 187”. The maximum power source is 97 HP diesel fuel. Maximum lift capacity of 10,000 lbs.
What is a forklift jib?
A forklift jib is a common type of attachment for forklift trucks. Forklift jibs are designed to slide and secure easily onto forklift tines. They usually have a hook at the end of the jib for quick attachment to the load. Purpose of a forklift jib.Sep 27, 2018
What are jib attachments used for?
Jib / crane attachments are slip-on attachments that allow the forklift to pick up loads through a lifting eye or by using slings.Jul 6, 2015
What is a jib hook?
A fork mounted jib or hook is generally used when it is required to lift the load from the top rather than lifting from below the load, for example where the fork times cannot fit under the load.
What is the highest a forklift can lift?
Forklift capacity is the measurement of how much weight a particular forklift can lift. Lower capacities begin around 3,000 lbs. and can go up to over 50,000 lbs.
What is free lift height in forklift?
A forklift's free lift is the maximum height you can raise the forks without changing the mast height. There are two instances where this typically happens: when the inner mast rails extend past the outer mast rails or when the load backrest or carriage exceeds the height of the outer mast rails.
Can forklifts go uphill?
OSHA Forklift Ramp Requirements OSHA defines any area where forklifts operate that exceed an angle of 10° as a ramp, incline, or slope. When driving a forklift on a ramp, OSHA CFR 1910.178 sets these standards: Grades shall be ascended or descended slowly.Jan 15, 2021