What percent tread is 8 32?

What percent tread is 8 32?

8/32" of useable tread depth. A tire that starts with 10/32" of original tread depth has 12.5% wear for every 1/32" that is worn away, and a tire that starts with 12/32" " of original tread depth, has 10% wear for every 1/32" that is worn away, etc.

Is 8 32nds good tread?

Used tires tread can be up to 90%, but the average is 6-8/32”. Tires in good condition should have a minimum of 6/32” to be useful, or 4/32” if the tire is 13-14”. The average legal minimum tread depth is 2/32”, but driving becomes unsafe with such a tread.

Is 8 mm good tire tread?

New tires have an average tread depth of 8 to 9 millimeters (10/32 to 11/32 inches). As you drive, the tread will wear down. A tire with a tread depth below 1.6 millimeters (2/32 inches) lacks grip. Braking distance and vehicle control are impaired.

What depth is 8 32 tread?

Fraction /32"s Inch MM -------------- ----- ---- 6/32" 0.188 4.76 7/32" 0.219 5.56 8/32" 0.250 6.35 9/32" 0.281 7.14

Is a tire tread depth of 8 32 GOOD?

Most states and tire manufacturers consider tires to be bald when one or more of their grooves are worn down to 2/32". So, if you start with a new tire tread depth of 10/32", the actual usable tread depth is 8/32". ... In other words, when a tire's tread depth is 2/32", it's time to get new tires. Don't wait.

Is 8 32 tread good for winter tires?

winter tires should have a tread depth of at least 4 millimeters (5/32 inches). They need to be thicker to handle wet, icy, and snowy conditions. Ensure your vehicle is equipped with the correct winter, summer, or all-season tires.

How many 32nds does a new tire have?

New tires typically come with 10/32” or 11/32” tread depths, and some truck, SUV and winter tires may have deeper tread depths than other models. The U.S. Department of Transportation recommends replacing tires when they reach 2/32”, and many states legally require tires to be replaced at this depth.Apr 1, 2021

Are 8 32 tire treads good for winter tires?

If your gauge measurement reads: 6/32" or higher: Your tire's tread depth is sufficient. 5/32": If snow-covered roads are a concern, you should consider replacing your tires. ... 2/32" or lower: Your tires are legally bald, and it's time to replace them.

Is 9/32 A good tread depth?

Average new tires used on cars typically start with 10/32" to 11/32" of original tread depth. ... As mentioned above, tires are legally "worn out" In most States when they reach 2/32" of remaining tread depth. For example, a typical tire that starts with 10/32" of original tread depth has only 8/32" of useable tread depth.

What is 9 32 on a tire?

Fraction /32"s Inch MM -------------- ----- ---- 8/32" 0.250 6.35 9/32" 0.281 7.14 10/32" 0.313 7.94 11/32" 0.344 8.73

Related Posts:

  1. What is a good treadwear rating?
  2. Is 400 a good treadwear rating?
  3. There is a guide to standard sofa sizes and dimensions.
  4. Is it bad to buy a used tire?