A 600S metal stud measures 6 inches on its web, or long face. Thus a metal stud taking the place of a two-by-four measures 1 5/8 by 4 inches, and a two-by-six, 1 5/8 by 6 inches -- slightly fatter but the same depth as their wood equivalents.
What is the standard size of metal studs?
3 5/8" wide
How are metal studs measured?
The flange of metal studs measures 1 5/8 inches, slightly larger than the narrow face of a nominal piece of 2-inch dimensional lumber, which in modern times really measures 1 1/2 inches. A stud with a web size, or long face, of 3 1/2 inches is termed a 350S and takes the place of a two-by-four.
What are the actual dimensions of a 2x4 metal stud?
A 2x4, for example, is really 3-1/2" x 1-1/2". Metal framing on the other hand, is referenced by actual size. As a result you will get exactly what you order. If you request a 3-5/8" steel stud, you will receive a full 3-5/8" width.
How tall are metal studs?
Made from cold-formed steelcold-formed steelThe first Allowable Stress Design (ASD) Specification was based on the research work sponsored by AISI at Cornell University under the direction of late Professor George Winter [2] since 1939. As a result of this work, George Winter is now considered the grandfather of cold-formed steel design.https://en.wikipedia.org › wiki › Cold-formed_steelCold-formed steel - Wikipedia, metal studs form a squared-C shape, with two short flanges flanking a long face called a web. The flange of metal studs measures 1 5/8 inches, slightly larger than the narrow face of a nominal piece of 2-inch dimensional lumber, which in modern times really measures 1 1/2 inches.
Conventional metal studs are available in 25, 22, 20, 18, and 16 gauge steel for your convenience (1-5/8″ available in 20, 22 and 25 gauge only).
Can metal studs support weight?
The axial load, or load weight limit, for metal studs varies widely. An 8-foot, 3-1/2-inch metal stud, for instance, may support over 2,000 pounds, while a 16-foot stud of the same width will support as little as 400 pounds.
What gauge metal studs are load bearing?
When the price is estimated by the gauge of steel used (the thickness of the metal), the cost is $2 – $5 per square foot. Most load-bearing walls require 16 or 18-gauge studs and interior walls are built using 20 or 25-gauge metal studs.Dec 10, 2019
Are steel studs stronger than wood?
For instance, wood studs are stronger than metal studs, and are able to support more weight without being compromised. They are also longer-lasting and easier to cut as well. On the negative side, wood studs are more expensive than steel and can be harder to install, requiring many different tools.