- Work Gloves. A good pair of work gloves is an absolute necessity when you're building a fence. ...
- Claw Hammer. The claw hammer is among the most commonly used tools in the entire world. ...
- Tape Measure. ...
- Post-Hole Digger. ...
- Shovel. ...
- Wire Cutters. ...
- Crimping Tool. ...
- Post Pounder.
What is the best way to install vinyl fence?
https://www.youtube.com/watch?v=WoKv1yxlaPw
What kind of screws do you use for vinyl fencing?
Stainless steel screws, snap cap washers, and snap caps may be used to secure vinyl fence post caps securely and other trim.
Should vinyl fence posts be set in concrete?
Manufacturers unanimously require vinyl fence posts to be installed into a concrete filled post hole. Setting vinyl posts into concrete provides a consistent footing to ensure the posts will remain inline and true for years to come. Concrete should fill the post hole up to 3-4 inches from the top.
How deep should a vinyl fence post be?
30 inches
How far apart should vinyl fence posts be set?
- For 6-foot fence panels, use 5-inch-by-5-inch posts placed 73 1/4 inches apart on center.
- For 8-foot panels, use 4-by-4 posts placed 96 inches apart on center.
Should a vinyl fence touch the ground?
Never install the vinyl fence too close to the ground The fence can topple under the pressure. Panels close to the ground may divert rainwater and cause flooding on the property. Always leave space below the vinyl fence panels.Sep 14, 2020
How do you anchor a vinyl fence?
https://www.youtube.com/watch?v=7aTod2YpZbY
How much space should be between ground and fence?
In most applications, a wood fence should be installed at least two inches off the ground. Your posts and rot boards (if you choose to install them) should be the only fence components that contact the ground.Jan 28, 2020
How do you protect a vinyl fence with wind?
To withstand high winds, install vinyl picket fencing using fence posts of between 3 ½ and 5 inches square, with wall thicknesses of . 160. Privacy fences, however, require posts of 5 inches square with heavy-duty wall thickness of between .