Use an incandescent light bulb to check the lamp's operation after plugging it back in. A compact fluorescent light (CFL) or LED (light-emitting diodelight-emitting diodeA light-emitting diode (LED) is a semiconductor light source that emits light when current flows through it. Electrons in the semiconductor recombine with electron holes, releasing energy in the form of photons.https://en.wikipedia.org › wiki › Light-emitting_diodeLight-emitting diode - Wikipedia) bulb only works in touch lamps if it is labeled as dimmable. Unplug the touch lamp and remove the light bulb if it still doesn't work.
Do I need a dimmable bulb for a touch lamp?
What Type of Bulbs to Use? It's worth noting that touch-sensitive lamps that are dimmable require a dimmable bulb or LED equivalent. Factor this in when you're planning to buy a touch lamp and avoid the disappointment of setting up the lamp at home only to realise that you need to buy a bulb before you can use it.
Will an LED bulb work in a touch lamp?
Lighting consultant Terry McGowan said that if a touch lamp has a mechanical switch, it will work with any CFL or LED bulb. However, if the lamp has an electronic switch, you'll need to use a CFL or LED bulb that's specially marked as dimmable. Even then you may have some problems, he said.
Does it matter what bulb I put in my lamp?
As long as you don't put a bulb that uses more than 60 watts in that socket you will be fine. The good news is the energy-saving bulbs that replace a 60-watt incandescent will only use 10 to 15 watts, depending on the actual bulb you buy, and give off the same amount of light.
Do you need a special bulb for touch lamps?
You do not need a special bulb for a touch lamp. You just bought a touch lamp, which you can turn on and off by touching the base of the lamp. You might wonder if your lamp requires a special bulb, but it doesn't. You can use any standard bulb for your touch lamp.
Will a smart bulb work in a touch lamp?
Smart plugs will work with touch lamps. Smart plugs simply turn the flow of electricity to the appliance or appliances that are plugged into it on or off. Touch lamps will turn on or off with a touch if they have enough electricity powering them and they have a working light bulb.
Can I use a halogen bulb in a touch lamp?
YES! You should not touch halogen capsule bulbs with your fingers. If you touch the bulb with your fingers, the salts and oils from your skin will damage the bulb and cause the heat to concentrate. This can significantly reduce the life of the bulb or even worse cause it to shatter.
Can you use LED bulbs in any lamp?
As long as the mounting base (socket) is the same size and type, you can use an LED bulb in an existing fixture. LED bulbs have much lower wattage than incandescent bulbs, so it's important to know the light output (in lumens) for the bulb you're replacing.
What kind of lightbulb do you need for a touch lamp?
Lighting consultant Terry McGowan said that if a touch lamp has a mechanical switch, it will work with any CFL or LED bulb. However, if the lamp has an electronic switch, you'll need to use a CFL or LED bulb that's specially marked as dimmable.