To repair hole in fiber cement siding there is a special putty that can be used as a patch. This putty should be included in every fiber cement repair kit. The patch is mixed, formed, and spread to match the contours of the board. You then let the patch dry and sand it to blend into the surrounding parts of the plank.
Can you repair cement board siding?
Repair or Patching Fiber Cement Board Siding Refer to manufacturer recommendations for products that are compatible with fiber cement. For small areas of damage you can use a sealant/caulk (preferably one designed for cement repairs) but then you will have to paint those areas of repair to match the original color.
How do you fill gaps in Hardie planks?
Ugly Caulking Wherever Hardie siding meets a trim board, the company recommends you leave a 1/8” gap between the siding and the trim and apply a 3/8” bead of approved caulking to protect and seal the edge of the siding.Feb 20, 2018
Do you need a special drill bit for Hardie board?
It can be cut and drilled just like wood. However, drilling through cement-fiber siding goes better if you use a carbide drill bit, as opposed to a regular steel drill bit. Cement-fiber siding can be drilled while installed on a house or prior to installation. ... Otherwise, the board siding may snap during drilling.
How do you fix a large hole in Hardie board?
Step 1: For holes larger than 1/2-inch in diameter, use a carton knife or carbide-tipped tool to cut a V-shaped groove behind the edges of hole. This will allow the patching compound to lock in behind the cement board. Step 2: Use a clean, damp sponge to wipe down the area to be patched.May 29, 2014
How do you fix a hole in cement board?
Patching Cement Board and Green Rock Just fill large gaps with cement for patching holes. In the case of fiber cement board, it's best to use thinset mortar, but if you're replacing drywall, you can use powdered patching compound which hardens after you mix it with water. Let the patches harden before proceeding.