Some PCs are different.A string of error messages, blue screens of death, and "nothing happens crash" when you try to turn on the computer?Regardless of your PC's crashed condition, you can still recover from it, or at least retrieve all your data, before completely reinstalling your OS computer.
Step 1: You should check your connections.
Make sure the connections are working if the system stops responding.It could be as simple as a cable coming loose if it's a desktop.The battery may not be seated correctly if it's a laptop.Don't worry until you've tightened the wires.
Step 2: You can use safe mode.
There are many options to consider if your PC is in a soft crashed state.Safe Mode is a diagnostic mode in the Windows and Mac OSes.There are no options in the Windows Safe Mode.This works without drivers being loaded.You should restart your computer.To get to the Boot menu, press the F8 key while it boots.From the Windows Advanced Options Menu, choose Safe Mode.If you have a Mac, power it down completely.Hold the Shift key until you see the Apple icon after hitting the start button.You are in Safe Mode.It will help if you perform a clean shutdown and boot into Safe Mode.
Step 3: The last known good configuration is used.
Even though it worked fine the last time you turned it on, it's another option after new hardware and drivers are installed.After hitting F8 you'll see this option on the boot menu.The full text is readable.The last working version of the Windows registry will be used to start the PC.It doesn't remove anything.
Step 4: It's a good idea to do a system restore.
The Windows built-in restoration feature is better than it was in the early days of Windows.This guide can be used to perform a proper restore.To reverse the effects of bad software or drivers, use System Restore to roll-back Windows to an earlier time when everything worked correctly.One is created for each installation in Windows.Before you make any changes to your PC, make a new restore point.Go to the Start menu and type "create a restore point".The create button is at the bottom of the dialog box.Wait a few seconds and give the restore point a name.The System Restore can be accessed through the Control Panel.Pick a point and roll it over.This doesn't affect your data, such as documents, music, photos, etc.Getting your software, drivers, and OS back in working order is what this is all about.You can restore previous versions by clicking on a file or folder.Something might be restored if it was part of the System Restore shadow copy.
Step 5: Do System Recovery.
There is a tool called Recovery Console in Windows.You can run it from a command line.The easiest way to access it is to use the original CD.The Recovery Console was replaced by the System Recovery Options menu.To get to the options, you need to reboot using the CD and select "Repair your computer".
Step 6: Use Boot Disks.
It's a method of storing system files in storage media other than your hard drive.They can help you with a problem.There are other options that can do the same job.You can get a Windows 7 System Recovery Disks if you're still using XP.There are a lot of Live CDs.These are Linux installation discs.The OS can be run from a disc or a flash drive.You can gain access to your hard drive when Windows goes down if you use a Live CD.
Step 7: Try the Rescue CDs.
They are all free.They also clean the registry and check the integrity of the discs.The free versions of Linux that are usually used to boot into tools are better than nothing.
Step 8: Data Recovery Software can be used.
You've tried everything to get Windows back, but sometimes it doesn't happen.You have made backups, right?The operating system can be reinstalled.Right?Data recovery software is the safest and cheapest.There are a lot of options: Get Data Back, EASEUS Data Recovery Wizard, and many more.Many of these programs can be used to get deleted files back from the dead.