It's a good idea to clean a window air conditioner.
It's important to keep your window air conditioner in good working order.During the cooling season, you should remove and rinse the filter.Store the unit indoors and cover it with a sheet of plastic or tarp.It's a good idea to disassemble it and give it a seasonal cleaning before you install it.To clean the interior tray, blow the coil with compressed air, and vacuum it.If your unit is dirty, deep clean it with a coil cleaner or oxygenated household cleaner.
Step 1: Look for signs of the disease.
If you notice a smell when you turn the A/C on, this method may help.
Step 2: Put hydrogen peroxide in a spray bottle.
The 3% solution is sold in stores.Alcohol can start a fire, so don't use it.bleach can damage the unit, so don't use it.Hydrogen peroxide should be labeled and kept out of the reach of children.
Step 3: The unit should be turned off.
On the front of the unit, spray the intake and outflow areas.It's a good idea to avoid inhaling or getting spray in eyes.The fumes are no longer a concern once it settles on the surface.After spraying, wash hands.
Step 4: It should be allowed to dry.
Turn the unit on again.It's best to spray when the unit is turned off for the night, as it allows plenty of time to dry.
Step 5: If necessary, do a deeper clean.
If this method isn't enough, spray further inside the unit after removing the filter.If you want to catch drips, place a tray underneath the unit.A turkey tray is an option.
Step 6: Don't turn the unit on and off often.
That's the best time of the year to breed microbes.The build-up of microbes is prevented by the continuous flow of condensate washing old water outside while the unit is on.
Step 7: The front panel of the unit should be removed.
Before removing the front panel, you need to turn the unit off.The front panel of your air conditioner is secured.Pull the filter out of the slot after removing the panel.You can either pull the filter up or slide it out of the slot.Check your manual for information on how to remove your front panel.
Step 8: The water should be run through the filter.
Run warm water and rinse the filter.If the filter is caked with dirt, use a vacuum hose attachment to clean it.It is a good idea to clean your filter at least once a month.If you have pets, you should clean it more often.The air filter needs to be replaced at least every 3 months.
Step 9: Put the filter back in place after it has been dried.
pat the filter with a dry towel after shaking off excess waterWait until it is completely dry.The front panel of the unit should be replaced when it is dry.Don't run an air conditioner with a wet filter.
Step 10: A worn filter needs to be replaced.
If your filter is damaged, you should replace it.If the filter is designed for your unit, identify your model number and order a new one online or from the manufacturer.You can buy a cut-to-fit air conditioner filter at your local home improvement store if your unit has a universal foam filter.
Step 11: The unit needs to be removed.
The power should be disconnected if the unit is off.The fins that attach the unit to the window should be removed.The screws that attach the exterior to the unit should be removed.Make sure you don't get the casing on any of the parts inside by sliding it away from the interior.Keep the screws in a safe place, like an envelope or small can, because they are small.
Step 12: The fins are made of aluminum.
Dust and debris from the aluminum fins can be removed with a fin comb or soft bristle brush.Inexpensive combs for window unit fins can be found online or at a home improvement store.When you clean the fins, you should wear gloves.
Step 13: Condensed air can be used to blow the coils and fan.
Condensed air can be purchased online or at a home improvement store.The front and back of the unit should be sprayed with spray.Dust can accumulate at the center of the unit.A small brush can be used to clean the coils.
Step 14: The tray needs to be wiped down.
The base of the unit's interior can be removed with a shop vac or vacuum hose attachment.After spraying it down, scrub it, then wipe it with a damp cloth.After drying the tray with a clean towel, you can reassemble the unit.
Step 15: During cooler weather, keep your air conditioner inside.
You should keep your window unit indoors when it's not in use.Take it out of the window and put it in the attic or basement.Dust and debris can accumulate if it is not covered with a plastic sheet or tarp.If you can't remove the air conditioner from the window, cover the unit's exterior with a tarp or cover.
Step 16: Remove the unit's case.
You can put the unit on a table with a hose.Remove the front panel and side fins from the window.Store the screws that attach the unit in a safe place, then slide them off.You can deep clean your air conditioner on a warm, sunny day.
Step 17: The interior should be sprayed with a cleaning solution.
You can use an air conditioner coil cleaner.A few drops of dish detergent can be mixed with warm water.The cleaner should be sprayed on the front panel, case, and window fins.The interior coil, fan, aluminum fins, and interior base should be sprayed.The parts should be soaked for about 10 minutes.
Step 18: If necessary, spray the unit and case again.
You can gently scrub the parts with a soft bristle brush.If you find stubborn dirt around the fan blades, spray them again and let them soak for a few minutes.Give them another scrub with your soft bristled brush.
Step 19: The case, coil, and tray should be washed with a hose.
The aluminum fins could be damaged by high pressure.It's a good idea to spray down the exterior panel.The aluminum fins, fan, and coil should be hosed down.To spray and drain the interior base, tilt the unit.You don't want the control panel to get wet when you hose it down.
Step 20: Before you reassemble your unit, let it dry.
After a few hours in the sun, leave your unit outside.The process can go faster if you towel dry as much water as possible.Wait until the unit is completely dry before you reassemble it.